NanoBlitz makes edibles and drinks take effect faster — typically in 10–15 minutes instead of 60–120 (see What to expect: onset below).
Mix NanoBlitz with your oil at up to 150°F, then add the mixture to your recipe at the point where you normally add oil.
How much to use
Use 1 to 2 parts NanoBlitz for every 3 parts oil, by weight or by volume. Start at 1:3 and run a trial batch to see whether your product needs more (see Finding your ratio below).
| Oil | NanoBlitz at 1:3 | NanoBlitz at 2:3 |
|---|---|---|
| 1 g | 0.33 g | 0.67 g |
| 5 g | 1.7 g | 3.3 g |
| 10 g | 3.3 g | 6.7 g |
| 30 g | 10 g | 20 g |
Measure both the same way — weight with weight, or volume with volume.
The ratio is based on the amount of oil, not its THC concentration. NanoBlitz solubilizes the oil itself, so the same ratio works whether your oil is weak or strong.
You still need to know your own THC concentration. It’s what sets the dose in your finished product — NanoBlitz doesn’t change it. How much oil you use depends on how much product you’re making and the dose you want per serving; once you know the oil amount, apply the ratio above.
Worked example: 10,000 gummies at 5 mg THC, using 90% THC oil
- Total THC needed: 10,000 gummies × 5 mg = 50,000 mg = 50 g THC.
- Oil needed: 50 g ÷ 0.90 = 55.6 g oil.
- NanoBlitz needed: 55.6 g ÷ 3 = 18.5 g at 1:3, or 55.6 g × 2 ÷ 3 = 37.0 g at 2:3.
| At 1:3 | At 2:3 | |
|---|---|---|
| Oil (90% THC) | 55.6 g | 55.6 g |
| NanoBlitz | 18.5 g | 37.0 g |
| Total NanoBlitz/oil mixture | 74.1 g | 92.6 g |
| Mixture per gummy | 7.4 mg | 9.3 mg |
Each gummy carries only a few milligrams of the mixture. That’s why it has to be mixed thoroughly into the hot formula before pouring — even distribution is what gives every gummy the same 5 mg.
How far each size goes
Approximate doses per container with 92% THC oil. NanoBlitz weighs about 1 g per mL.
| Size | Dose | At 1:3 | At 2:3 |
|---|---|---|---|
| 2 oz (59 mL) | 5 mg | ~32,600 | ~16,300 |
| 10 mg | ~16,300 | ~8,200 | |
| 20 mg | ~8,200 | ~4,100 | |
| 1 Quart (946 mL) | 5 mg | ~522,000 | ~261,000 |
| 10 mg | ~261,000 | ~131,000 | |
| 20 mg | ~131,000 | ~65,000 | |
| 1 Gallon (3,785 mL) | 5 mg | ~2,090,000 | ~1,045,000 |
| 10 mg | ~1,045,000 | ~522,000 | |
| 20 mg | ~522,000 | ~261,000 |
Weaker oil means more oil per dose, so fewer doses per container — scale these figures by your oil’s THC percentage ÷ 92.
Steps
- Measure your oil and NanoBlitz at your chosen ratio.
- Heat and mix. Combine them at an elevated temperature, up to 150°F, and mix until uniform.
- Add to your recipe at the point where you normally add oil. Add it while the recipe is warm if you can — elevated temperature is preferred.
- Mix thoroughly so the mixture is evenly distributed, then finish your recipe as usual.
Gummies
Add the NanoBlitz/oil mixture at the high-temperature step, just before pouring.
- Prepare your NanoBlitz/oil mixture (steps 1–2 above).
- Heat your gummy formula to its usual high temperature.
- Add the NanoBlitz/oil mixture at that high-temperature step.
- Mix thoroughly.
- Pour into molds.
Finding your ratio
Every recipe is different, so run small trial batches to find out whether 1:3 or 2:3 works best for your product.
- Make one small batch at 1:3 and one at 2:3, keeping everything else the same.
- Compare the two, and use the ratio that gives you the result you want.
- Scale that ratio up for production.
Need help with a specific formulation? Contact us and our chemist will work through it with you.
What to expect: onset
Products made with NanoBlitz typically take effect in 10–15 minutes, compared with 60–120 minutes for standard edibles that aren’t nanoemulsified.
The 10–15 minute figure is typical for someone who isn’t a regular user. In regular users, THC already in the body affects when they feel the onset, so their experience can differ.
Storage
Once opened, keep NanoBlitz in the refrigerator.